ESP32: Difference between revisions
Content added Content deleted
No edit summary |
(→Basics) |
||
Line 4: | Line 4: | ||
= Basics = |
= Basics = |
||
{{UC}} |
|||
= Installation = |
= Installation = |
Revision as of 12:15, 1 August 2020
Basics
This section is under construction. |
Installation
http://micropython.org/download/esp32/
- The following files are daily firmware for ESP32-based boards, with separate firmware for boards with and without external SPIRAM.
- Non-SPIRAM firmware will work on any board, whereas SPIRAM enabled firmware will only work on boards with 4MiB of external pSRAM.
- Firmware is provided using either ESP-IDF v3.x or v4.x. If in doubt use v3.x.
- Firmware built with ESP-IDF v3.x, with support for BLE, LAN and PPP:
- Firmware built with ESP-IDF v4.x, with support for BLE, but no LAN or PPP:
esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash
esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 460800 write_flash -z 0x1000 esp32-20190125-v1.10.bin
- References
{{#widget:DISQUS
|id=networkm
|uniqid=ESP32
|url=https://aman.awiki.org/wiki/ESP32
}}