NodeMCU Projects

Analog Temperature Meter

Requirements:

DS18B20 Temperature sensor
Servo Motor
Micropython based NodeMCU

Wiring details:

Servo motor = D4 => GPIO 2
DS18B20     = D7 => GPIO 13

import time
import machine
import onewire, ds18x20

# the device is on GPIO13
dat = machine.Pin(13)

# create the onewire object
ds = ds18x20.DS18X20(onewire.OneWire(dat))

# scan for devices on the bus
roms = ds.scan()
print('found devices:', roms)

# servo is connected to GPIO2
servo = machine.PWM(machine.Pin(2), freq=50)

# Function for mapping range
def translate(value, leftMin, leftMax, rightMin, rightMax):
    # Figure out how 'wide' each range is
    leftSpan = leftMax - leftMin
    rightSpan = rightMax - rightMin

    # Convert the left range into a 0-1 range (float)
    valueScaled = float(value - leftMin) / float(leftSpan)

    # Convert the 0-1 range into a value in the right range.
    return rightMin + (valueScaled * rightSpan)
 
# print all temperatures
while True:
    ds.convert_temp()
    time.sleep_ms(1000)
    for rom in roms:
        print(ds.read_temp(rom))
    temp = ds.read_temp(rom)
    srv = translate(temp, 20, 35, 115, 40)
    print(int(srv))
    if (temp>=20) & (temp<=35):
        servo.duty(int(srv))
    else:
        print("Out of Range")

References

{{#widget:DISQUS |id=networkm |uniqid=NodeMCU Projects |url=https://aman.awiki.org/wiki/NodeMCU_Projects }}