XenDesktop: Difference between revisions

= Netscaler Integration into XenDesktop =

== Initial Config ==

*Install License

*Configure Subnet IP (SNIP)

*Configure DNS server address

== Certificate ==

*Enable SSL feature in Netscaler [https://www.digicert.com/csr-creation-ssl-installation-citrix-netscaler.htm],[http://support.citrix.com/article/CTX109260]

# If you see an Orange icon next to 'SSL', you need to right click and enable feature.

# If you see a Red Icon there, then you need to install correct License.

*Generate Private Key(in Create RSA Key section).

*Generate CSR

*Create Certificate from CA

== Integrate XenDesktop ==

*Goto XenDesktop & XenApp.

*Select StoreFront

*Enter "NetScaler Gateway IP Address". This is called VIP.

*Also enter FQDN of VIP address under "Virtual Server Name".

*Select Certificate-Key Pair.

*Enter Authentication info:

#AD Server IP

#Base DN

#Admin account

#Server Logon Name Attribute (sAMAccountName for XenApp/XenDesktop)

*Enter StoreFront Info:

#Storefront FQDN

#Site Path - add 'Web' at the end in case it is a web store(not receiver based).

#Domain name

#STA server info (this is generally http://<Storefront FQDN>)

#SF IP

#Protocol (default is 80)

== Testing and Troubleshooting ==

* If you get the error "internal Server Error 43531"

#Check the DNS settings in NS

#NG can't connect to SF because a firewall is blocking

#Could be incorrect FQDN of StoreFront - try IP instead for test

#LB vserver if you do load balance SF servers - try IP instead for test

#Check if correct store name is defined

#Could be wrong subnet IP defined

* Certificate not bound issue.

#Goto Virtual Servers

#Bind Certificate to the VIP.

#It should now appear as UP (Green Button).